phone: 5182709822

LEAD TIMES:  Basic part orders 10-15 Business Days. Complete Short Arm/Mid Arm Systems 3-5 Weeks. Coil Over or Standard Long Arm Systems 4-6 Weeks.  Customized Orders 7-9 Weeks. (This is to Ship from Time of Order)

JL 4.5" Adventure - X PRO Long-Arm System

$6,534.32 - $11,187.15
Write a Review

The Rock Krawler Suspension JL Wrangler 4.5 inch Adventure - X PRO Long-Arm System is the ultimate in compromise between daily driver/hard core off-roader. The "PRO" signifies you are entering the realm of PB&J (PURE BEEF AND JEALOUSY) by purchasing a system that is outfitted with 4 BILLET ALUMINUM CNC MACHINED SERVICE FREE lower control arms in a long arm length! This is as good as it gets; absolute strength, paired with a maintenance free peace of mind will have you blasting down any trail in America! The Adventure-X2 systems combine the benefits of a full high clearance 4 link front suspension with a high clearance independent 3 link rear suspension. Say goodbye to greasing your joints, our service free longarm system is here to stay. In every single control arm, we have our Adventure series joint center, which isolates harsh road vibrations equivalent to an OE bushing, includes high misalignment, and is fitted with a steel sleeve (that the bolt passes through) which rotates freely on a additional Teflon lined inner sleeve to insure that you are never chafing, twisting, or deforming the bushing material inside the housing as you blast through the mud, sand, sleet, salt, snow, dirt and dust. To finish it off, as you tighten your control arms into the mounts, the sleeve of the joint is engineered to be the buffer between the clamping force of a bracket, which means that as you tighten everything, you are not compressing the bushing. This all makes for an incredibly long lasting joint that never requires a drop of grease, and makes zero noise inside the housing. This is where conventional on road handling meets bad ass off-road ability. With enhanced rear instant center(s) and rear roll center(s), X2 rear suspension geometry is the smoothest riding 3-Link suspension you can take down a trail or cruise across America in your Wrangler. The new high clearance axle mounts provide 4.5” of ground clearance under the rear axle as compared to stock. The rear upper shock relocation brackets ensure you do not lose any shock or suspension travel. The combination of a full high clearance 4-link long arm front suspension and high clearance independent 3 link rear long arm suspension lets you dominate the streets and the trails. 

When we design a system, our goal is to provide you with the most comprehensive solution and the best geometry, install exceptional value, and be the foundation for every adventure whether it be on the Street, In tow, or down a Trail!  Thank you for considering Rock Krawler Suspension

System Benefits:

  • Excellent Highway Ride
  • Improved Off-Road Ability
  • Maintenance Free/ High Ability Control Arms Featuring our Award Winning Adventure Series Joints
  • Full High Clearance Design
  • High Clearance 4 Link Long Arm Front Suspension
  • High Clearance Independent 3 Link Long Arm Rear Suspension
  • Weld on Long Arm Mounting Brackets with Weld Scheduling just like OEM
  • Heat Shield thermal barrier products, just like OEM to protect the front control arm joints at the frame
  • 4.5" Rear Clearance Gain from the X2 Axle Bracket System
  • Adjustable Rear Anti-Squat Featuring X2 Geometry
  • Designed to be the Ultimate Compromise between On Highway Handling and Hard Core Off-Road Ability
  • Lifetime Warranty Coverage

System Includes:

  • (1) Weld-on front long arm mounting system
  • (1) Heat Shield Products Sticky Shield Kit
  • (1) Front adjustable anti-wobble track bar
  • (2) Billet Aluminum front lower control arms
  • (2) Adjustable front upper control arms
  • (1) Front sway bar disconnect kit
  • (4) Triple rate coil springs
  • (4) JL coil spring correction seats
  • (2) Weld-on rear frame side long arm mounts
  • (2) Billet Aluminum Rear lower control arms
  • (1) Rear upper control arm
  • (1) Rear frame side upper control arm mount
  • (2) Rear extended sway bar links
  • (1) Rear adjustable anti-wobble track bar
  • (2) Weld-on rear upper shock mount
  • (2) Weld-on rear axle side control arm mount
  • (1) Weld-on rear track bar mount
  • (1) Weld-on rear axle truss
  • (2) Rear brake line relocation brackets


  • Bumpstops are included with all shock options

 Shock Information:

  • Generic Front Shock Length – 18.31” Collapsed/ 30.31” Maximum Extended
  • Generic Rear Shock Length – 19” Collapsed/ 31” Maximum Extended

RRD Spec'd 2.25" Shocks: IN-HOUSE Designed and built - 2.25" Fluted aluminum construction, hard coat military grade black anodizing, IFP (Internal floating piston), better bushings to achieve better misalignment, fully serviceable and rebuildable

  • RRD Spec Front Shock
  • Part Number RRD02287
  • RRD Spec Rear Shock
  • Part Number RRD02288

Bilstein Shocks

  • Part Number RRD04050-B51
  • REAR
  • Part Number RRD04051-B51

Remote Reservoir 2.625" Coilover Shocks: Remote reservoir standard, IFP construction, MASSIVE 2.625" shock bodies, fluted aluminum bodies, 1" shaft, 1.25" mounting width, hard coat military grade black anodizing, fully serviceable and rebuildable. 

  • RRD Spec Front Remote Reservoir Coilover
  • Part Number RRD07868RR
  • RRD Spec Rear Remote Reservoir Coilover
  • Part Number RRD07674RR
  • RRD Spec Remote Reservoir (NON-Coilover) Rear Shock
  • Part Number RRD07870RR
Wheel/ Tire Fitment:
  • Sport and Sahara with Full OEM Fenders
    37" Tall Tires (3" Bump Stop Height Recommended) - Recommended 4.5" of Backspacing
    Sport and Sahara with Trimmed or High Lined OEM Fenders
    38" Tall Tires (3" Bump Stop Height Recommended)

    Rubicon with Full OEM Fenders - Recommended 3.5" of Backspacing
    37"/38" Tall Tires (3" Bump Stop Height Recommended)

    Rubicon with Trimmed or High Lined OEM Fenders
    40" Tall Tires (3" Bump Stop Height Recommended) Recommended 3.5" of Backspacing
 General Notes:
  • All lift heights based on Rubicon models for standard style build (i.e., front bumper and winch, rear bumper and full-size spare).
  • XR Package does not require OUR raised rear track bar bracket, the factory axle has a raised rear trackbar bracket, and for OUR systems that do not have a rear trackbar one must be added.
  • If building with a spare delete, we recommend dropping 1” in coil lift height for the rear.
  • If building an overland or heavily upfitted build in the back, we recommend upsizing 1” in coil lift height for the rear.
  • Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29"
  • Requires welding of the Front and Rear Long Arm Mounts
  • Requires removal of the OEM frame side lower front and rear control arm mounts
  • Requires removal of the OEM frame side front and rear upper control arm mounts
  • Requires removal of the OEM axle side rear lower control arm and track bar mounts
  • Requires modifying the OEM rear shock mounts and welding of the raised rear upper shock mounts
  • Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up
Drive Type::
Compatible Engine Options::
3.6L Pentastar V6
Fuel Type::