null
phone: 5182709822

JT 4.5 Inch Pro-X Coil Over System

$7,324.10
Write a Review
SKU:
JT45PX-CS

The Rock Krawler JT 4.5 inch Pro-X Coil Over System was specifically designed for JT owners who want coil overs up front, maximum articulation from a mid-arm kit and the durability and off-road performance you expect from Rock Krawler Suspension. The triangulated 4 link rear assembly maintains the rear axle perfectly centered; allows for removal of the rear track bar, eliminates rear suspension bind, and the cross talk of the front and rear track bar arrangement greatly smoothing the highway ride. The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment. The Triple Rate front coils paired with our Quad rate rears coils provide unmatched ride quality and off-road performance, while maintaining standard JT rear load capacities. (Also, available for Dana UD60 and Dynatrac XD60 Applications)

System Benefits:

  • 2.625” Remote Reservoir Coil Over Front
  • 2.625” Remote Reservoir Shock Rear
  • Excellent Highway Ride
  • Improved Off-Road Ability
  • Bolt In Triangulated 4 Link Rear
  • Eliminates Front and Rear Track Bar ”Cross Talk”
  • The Rear Axle Remains Perfectly Centered
  • Greatly Improved Rear Pinion Cycle w/ Equal Length Rear Upper and Lower Arms
  • Quad Rate Rear Coils
  • Rear Spring Correction Spring Seats to minimize Coil Bow
  • Lifetime Warranty on All Hard Parts

System Includes:

  • (2) 2.625” remote reservoir front coil overs
  • (2) 2.625” remote reservoir rear shocks
  • (2) Frame side coil over mounts
  • (2) Axle side coil over mounts
  • (2) Quad rate rear coil springs
  • (4) High clearance adjustable lower control arms
  • (4) Adjustable upper control arms
  • (2) Rear spring correction seats
  • (1) Adjustable front track bar
  • (1) Carrier bearing drop bracket
  • (2) Front sway bar links
  • (1) Pro-X bolt in rear axle cradle
  • (2) Extended rear sway bar links
  • (1) Drill and Tap Kit

Tire Fitment:
Sport and Overland with Full OEM Fenders
37” Tall Tires (3” Bump Stop Height Recommended)
Sport and Overland with Trimmed or High Lined OEM Fenders
38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
37”/38” Tall Tires (3” Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
40” Tall Tires (3” Bump Stop Height Recommended)

Wheel Fitment:
Sport and Overland Wheel Fitment Recommendations
37”/38” Tall Tires - Recommend 3.5” of Backspacing
Rubicon or Sport with Wide Track Axles Fitment Recommendations
37”/38” Tall Tires - Recommend 4.5” of Backspacing
40” Tall Tires - Recommend 3.5” of Backspacing

General Notes:
*All lift heights based on Rubicon models
*Designed to maintain 1/2” of rake on Rubicon Models
*As shown valid for OEM axles only
*If so equipped will require removal of rear shutter shock
*For tires larger than 37” or hard core off-road use, welding of the rear cradle to the axle tubes is required
*Requires aftermarket front drive shaft

Customers Also Viewed

From the same Collection