null

#RKSUSPENSION - Made in U.S.A.

phone: 5182709822

LEAD TIMES:  Basic part orders 5-10 Business Days. Complete Short Arm/Mid Arm Systems 2-4 Weeks. Coil Over or Standard Long Arm Systems 3-5 Weeks.  Customized Orders 6-8 Weeks. (This is to Ship from Time of Order)

JT 3.0 Inch Silverback Coil Over System

$7,927.02
Write a Review
SKU:
JT30SB-CS

The JT 3.0 Silverback suspension systems bring together the advantages of a full high clearance 4 link long arm front suspension with a triangulated 4 link rear assembly. This setup keeps the rear axle perfectly centered throughout the suspension cycle; allows for removal of the rear track bar, eliminates rear suspension bind, and the cross talk of the front and rear track bar arrangement greatly smoothing the highway ride. The X Factor Series adjustable lower control arms offer a total of 90 degrees of misalignment. The Triple Rate front coils paired with our Quad rate rears coils provide unmatched ride quality and off-road performance, while maintaining standard JT rear load capacities.

System Benefits:

  • Excellent Highway Ride
  • Improved Off-Road Ability
  • Weld On Long Arm 4 Link Front
  • Bolt In Triangulated 4 Link Rear
  • Eliminates Front and Rear Track Bar "Cross Talk"
  • The Rear Axle Remains Perfectly Centered
  • Triple Rate Front Coil Springs paired with Quad Rate Rear Coils
  • Front & Rear Spring Correction Spring Seats to minimize Coil Bow
  • Lifetime Warranty on All Hard Parts

System Includes:

  • (1) Weld-on front long arm mounting system
  • (1) Heat Shield Products Sticky Shield Kit
  • (1) Front adjustable anti-wobble track bar
  • (2) High clearance adventure series front lower control arms
  • (2) Adjustable front upper control arms
  • (2) 2.625” remote reservoir front coil overs
  • (2) 2.625” remote reservoir rear shocks
  • (2) Frame side coil over mounts
  • (2) Axle side coil over mounts
  • (1) Front sway bar disconnect kit
  • (2) Quad rate rear coil springs
  • (4) High clearance adjustable lower control arms
  • (4) Adjustable upper control arms
  • (4) Spring correction seats
  • (1) Adjustable front track bar
  • (1) Pro-X bolt in rear axle cradle
  • (2) Extended rear sway bar links

*hardware and detailed instructions

Tire Fitment:
Sport and Sahara with Full OEM Fenders
38" Tall Tires (4" Bump Stop Height Recommended)
Sport and Sahara with Trimmed or High Lined OEM Fenders
40" Tall Tires (4" Bump Stop Height Recommended)
Rubicon with Full OEM Fenders
39"/40" Tall Tires (4" Bump Stop Height Recommended)
Rubicon with Trimmed or High Lined OEM Fenders
42" Tall Tires (4" Bump Stop Height Recommended)

Wheel Fitment:
Sport and Sahara Wheel Fitment Recommendations
38" Tall Tires - Recommend 3.5" of Backspacing
Rubicon Fitment Recommendations
39" Tall Tires - Recommend 4.0" of Backspacing
42" Tall Tires - Recommend 3.5" of Backspacing

Shock Notes:
Generic Front Shock Length - 18-19" Collapsed/ 31" Maximum Extended
Generic Rear Shock Length - 19" Collapsed/ 32" Maximum Extended

General Notes:

*All lift heights based on Rubicon models for standard style build (i.e., front bumper and winch).

*If building an overland or heavily upfitted build in the back, we recommend upsizing 1” in coil lift height for the rear.

*Designed to maintain 1/2" of rake on Rubicon Models

*As shown valid for OEM axles only

*If so equipped will require removal of rear shutter shock

*For tires larger than 37" or hard core off-road use, welding of the rear cradle to the axle tubes is required.

*Requires welding of front long arm mounts

*Recommend a new front C.V. driveshaft for all front shocks with max. extended length greater than 29in