JKU 3.5 Adventure Series 1 Long Arm

Our Price: $3,688.55
(No reviews yet) Write a Review
SKU:
JK35AS1LA-4
System Benefits:
  • Excellent Highway Ride and Handling
  • Unbelievable Off-Road Ability
  • No Axle Welding
  • Conventional Suspension Geometry
  • Triple Rate Coil Springs
  • PRO Front Sway Bar Disconnects/Extended Links
  • PRO Rear Extended Sway Bar Links
  • 33" or 35" Tires (OEM Fenders)
  • 37" Tires (Flat Fenders)
  • Abuse Proof Lifetime Warranty on All Hard Parts
  • Upgradeable to any other Rock Krawler System
System Includes:
  • (4) Triple rate coil springs
  • (2) High clearance adjustable front lower control arms
  • (2) Adjustable front upper control arms
  • (1) Adjustable Anti-Wobble front track bar
  • (2) Adjustable front sway bar disconnects
  • (2) Sway bar straps
  • (2) Front frame side long arm mounts
  • (1) 1/4" thick laser cut steel cross member
  • (2) Rear frame side long arm mounts
  • (1) Adjustable Anti-Wobble rear track bar
  • (1) Bolt on rear track bar relocation bracket
  • (2) High clearance adjustable front lower control arms
  • (2) Adjustable rear upper control arms
  • (2) Rear extended sway bar links
  • (4) Long travel stainless steel brakes
*hardware and detailed instructions 
 
RRD Spec'd Prodigy Shocks:
RRD Spec Front Shock
Part Number RRD02291
 
RRD Spec Rear Shock
Part Number RRD02292
 
*requires 3" bump stops both front and rear
 
RRD Spec'd TT Shocks:
RRD Spec Twin Tube Front Shock
Part Number RRD04000
 
RRD Spec Twin Tube Rear Shock
Part Number RRD04002
 
*requires 3" bump stops both front and rear
 

Bilstein 5100 Shocks:

  Bilstein Part # Bump Stop
Front 24-186872 3"
Rear 33-186887 3"

or

Generic Front Shock
Recommendation with 3" bump stops - 17" Collapsed to 29" Extended

Generic Rear Shock
Recommendation with 3 " bump stops - 17" Collapsed to 27" Extended
- Requires welding of the Front and Rear Long Arm Mounts.
- Requires removal of the OEM frame side lower front and rear control arm mounts.
- Requires removal of the OEM frame side front upper control arm mounts.
- Minor exhaust rerouting required before the collector on the driver's side. This is recommended to be done prior to the suspension system being installed.
- Recommend installing limiting straps to avoid over extension of suspension components after vehicle is all set up.
- We typically recommend 4.5" of back spacing on rims for 33" and 35" tall tires.
- We typically recommend 3.5" of back spacing on rims for 37" tall tires.
 

FOR INFO OR TO ORDER:
518-270-9822